The clocks can only be set indirectly with the functions that utilize them such as the timebase blocks. Despite the fact that this card has dedicated digital input lines, you still need to configure all the channels which will be used as digital inputs. National Instruments Hardware Type: The supported analog input configurations are Referenced singled-ended 0 , Non-referenced singled-ended 1 , Differential 2. All of the options follow the form:. Then set the PWM output frequency in Hz or duty cycle field to the desired frequency or duty cycle. For example, enter 0:
|Date Added:||26 March 2010|
|File Size:||45.17 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
In order to usn the analog input configuration for the selected channels in 6211 Analog Inputs tab of the HIL Initializeset the Analog input channels field to the analog input channels on the board for the current diagram, and then set ni usb 6211 Analog input configurations field to the desired configuration.
You can zoom in close to see the labels with the serial number or zoom out to see the overall ni usb 6211 of the equipment. We appreciate your interest in using our InstraView website!
Specify 1 to indicate channel usg alone. Hence, a scalar value will apply ni usb 6211 all channels specified in the Digital output channels field. See the description of the HIL Initialize block for details on these modes.
Please feel free to contact us at sales artisantg. To have bidirectional counters, the CTR-AUX should be assigned to ni usb 6211 physical input, and again due to the limited number of input pins, this cannot be done for both counters at 62211 same time, so only one counter can be ni usb 6211 in bidirectional mode.
He is a lifelong computer geek and loves everything related to computers, software, and new technology. Features Up to 80 Analog Inputs at 16 bits, 1. nu
As mentioned earlier in this section, the counters cannot be used as both encoder inputs and PWM outputs. The following are the available options and valid values for this board.
One of our friendly Customer Service ni usb 6211 will hsb contacting you shortly with information on when the equipment you requested will be available for viewing. Therefore, the acceptable value for duty cycle is related to the frequency at which the signal is being generated.
News Blog Facebook Twitter Newsletter.
Please contact one of our Customer Support Specialists if you have any questions about what is included with this equipment or if you require any additional information. The same holds true of the 62111 creation functions. If the vectors specified in these fields are shorter than the channel ni usb 6211 than the value of the last element in ni usb 6211 vector will be used for the rest of the channels.
National Instruments Ni Usb Data Acquisition Controller | eBay
Please contact us to complete your request. Supported with no communication to the hardware. Next set the analog input maximum and minimum. When adding a timebase block, you must change the Samples in buffer field or you will receive the error “The specified buffer size is not valid.
The options and their values are not case ni usb 6211 for the National Instruments boards. Also, the Set PWM output parameters at model start checkbox should always be checked. Then set the PWM output frequency in Ni usb 6211 or duty cycle field to the desired frequency or duty cycle. Hence, a scalar value will apply to all channels specified in the Encoder input channels field. Only one timebase block may be present in a diagram. Finally, set the Initial analog outputs and Ni usb 6211 analog outputs to the desired voltage values.
National Instruments Ni Usb-6211 Data Acquisition Controller
Please note that any additional items included with this equipment such ni usb 6211 accessories, manuals, cables, calibration data, software, etc. All of the options follow the form:. Manuals, Datasheets, Drivers, Links. You are downloading trial software. When in duty cycle mode, the acceptable ni usb 6211 of duty 62211 are:. All of the analog inputs must have the same input range for this card, so only a single scalar in each field is necessary to set the range for all the specified channels.
Differential for eight channels followed by referenced single-ended for eight channels.
Note that since this ni usb 6211 uses its counters for both encoder inputs and PWM outputs, you can only use a counter as either an encoder input or a PWM output channel. Set the Encoder input channels field 62111 all the encoder channels that will be used on the board for the ni usb 6211 diagram.